Tabla de contenidos |
---|
Before proceeding, please make sure that you have your database setup properly - HERE
Now that you have the source compiled you need to extract some necessary files.
Extractors
Trinity requires dbc and map files. It is optional but highly recommended to also extract Vmaps, which enable Line-of-Sight rules (casting through walls, etc) and Sanctuary areas (like Dalaran). Another option, which is still experimental and in progress, are Mmaps, which enable correct NPC pathings (along walkways instead of through walls).
WARNING: Use ONLY Trinity's extractors. Others are NOT supported.
If you use extractors from other projects it is almost certain that your TrinityCore will not recognize the extracted data! There is only one way in which you can be certain to obtain the correct extractors. If you add the option TOOLS in CMake before compiling, you will get them in your D:\Build\bin\Release\ folder after compilation is complete.
Extracting DBC, Maps, VMaps & MMaps
1. Browse into your D:\Build\bin\Release folder and copy these files into your root World of Warcraft folder (where the Wow.exe is located):
Panel |
---|
mapextractor.exe mmaps_generator.exe vmap4extractor.exe vmap4assembler.exe makevmaps_simple.bat |
If you do not have makevmaps_simple.bat, create an empty one inside your root World of Warcraft folder. Once created, open it in Notepad and copy/paste the following inside it:
Bloque de código | ||||
---|---|---|---|---|
| ||||
vmap4extractor.exe
md vmaps
vmap4assembler.exe Buildings vmaps
pause
|
2. Run mapextractor.exe and wait until it is finished.
3. Move the dbc and maps folders to the D:\Build\bin\Release folder.
4. Run makevmaps_simple.bat.
Note: Extracting the vmaps will take a while depending on your machine (30 min. - 2 hours). Do not attempt to stop this process. It is finished when it prints "Press any key...". It will create two new folders: buildings and vmaps. The buildings folder is completely useless post-running and can be safely deleted.
5. Move the vmaps folder to the same directory as dbc, maps and the TrinityCore binaries.
The following steps are optional but recommended:
1. Move mmaps_generator.exe to the same directory as dbc, maps, and the TrinityCore binaries.
2. Create a folder called "mmaps" and run mmaps_generator.exe.
...
Note: The mmaps are experimental right now. Any bugs should be reported to the Issue Tracker.
Setting up the configuration files
Browse into your Release folder (Can differ depending on OS)
...
You should now have worldserver.conf and authserver.conf within your Release folder (Windows).
- Linux has it within /trinitycore/etc/
- Mac has them within /opt/trinitycore/etc/
worldserver.conf
Scroll down to the LoginDatabaseInfo, WorldDatabaseInfo, and CharacterDatabaseInfo config options and enter MySQL Server login information for the server to be able to connect to your database.
On a newly compiled config, you should have the following values:
Panel |
---|
LoginDatabaseInfo = "127.0.0.1;3306;trinity;trinity;auth"
WorldDatabaseInfo = "127.0.0.1;3306;trinity;trinity;world"
CharacterDatabaseInfo = "127.0.0.1;3306;trinity;trinity;characters" |
It follows this structure:
Panel |
---|
Variablename = "MySQLIP;Port;Loginname;Password;database" |
The following settings must be verified:
...
- Run on your root password you used when you installed MySQL Server Community Edition(e.g. 'root':'password'), which is strongly not recommend if the server is somehow public.
- create an unique login within a User Manager within your prefered database management tool (commonly identified by an icon that looks like a person or people) and give it necessary permissions (SELECT, INSERT, UPDATE, DELETE permissions are sufficient, and is much safer).
...
IMPORTANT: If you choose not to run vmaps or mmaps, you must make the following changes:
- vmap.enableLOS = 1 – set this to 0
- vmap.enableHeight = 1 – set this to 0
- vmap.petLOS = 1 – set this to 0
- vmap.enableIndoorCheck = 1 – set this to 0
- mmap.enablePathFinding = 0 (default - keep this 0)
- Note: If you change your mind and decide to extract and use vmaps or mmaps later, make sure to change these values back to "1" to take advantage of them.
- Pro Tip: For most worldserver.conf setting changes, you can simply type .reload config in-game to see changes instantly without restarting the server.
authserver.conf
Scroll down to the LoginDatabaseInfo and enter MySQL Server login information.
Panel |
---|
LoginDatabaseInfo = "127.0.0.1;3306;trinity;trinity;auth" |
It follows this structure:
Panel |
---|
Variablename = "MySQLIP;Port;Loginname;Password;database" |
Just like the worldserver.conf, you have to enter these necessary values and customize your preferences.
Realmlist Table
You need to make sure that your authserver application directs incoming connections to your realm.
- Run your chosen database management tool (ex. SQLYog or HeidiSQL, but also web-applications like Phpmyadmin for servers with php extension)*
- Open the auth database and find the realmlisttable. You need to edit the address field according to your needs:
- LAN IP (192.168.x.x) - If you are installing TrinityCore on a different computer from where you run WoW, but all the computers involved are on the same network (router) use that computer's Local Area Network IP.
- 127.0.0.1 - Also known as "localhost". Leave this setting alone here and in your configs if you've installed TrinityCore on the same computer you run WoW on, and only you are connecting to it.
External IP – If you want other people to connect to your server, use your external IP. Visit http://www.whatismyip.com/ to find your external IP address.
Advertencia title Public Servers The TrinityCore Team and Owners DO NOT in any case sponsor nor support illegal public servers. If you use these projects to run an illegal public server and not for testing and learning it is your own personal choice.
Running and Connecting to Your Server
After completing all the steps listed above you can now start your server.
- Run the authserver and worldserver to run your server. Both must stay running for your server to accept connections to it.
- Tip: The authserver allows you to enter your username/password to connect to the Realm Selection screen, and the worldserver allows you to connect to the realm itself. Once you are in-game, the authserver can be safely closed if you wish.
- Open the realmlist.wtf file inside your World of Warcraft\Data folder. The IP in the realmlist.wtf file should be exactly the same as the IP address you entered in the realmlist table above.
- Change the first line to: set realmlist <IP address used in realmlist table>
- Example: set realmlist 127.0.0.1
- (Optional) If you wish to use the WoW Launcher.exe to run your client then you must change your set patchlist to the same ip/dns name as your realmlist.
Final Steps
You can type commands inside the worldserver program, similar to a command prompt.
...
- Example: account create test test
...
- Example: account set gmlevel test 3 -1
- DO !NEVER! create an account directly into your database unless you are ABSOLUTELY SURE that you know what and how to do!
- DO !NEVER! create an account directly into your database unless you are ABSOLUTELY SURE that you know what and how to do!
...
- Tip: Open the world database in your database management tool and find the command table. This table shows a full list of GM commands, their descriptions, and the security (GM level) needed to use them. You will not find a more accurate list of current GM commands anywhere else (assuming you keep your database up-to-date). The security level for a given command identifies that THAT GM level can use the command, along with all GM levels above it. For example, if a command has a security of 2, all accounts with a GM level of 2, 3, and 4 will be able to use it.
...
Info | ||
---|---|---|
| ||
You can find it in our new wiki at: https://trinitycore.info/en/install/Server-Setup |