Guide

This article is part of the Installation Guide. You can read it alone or click on the previous link to easily move between the steps.

3.3.5a only:

Open the realmlist.wtf file inside your World of Warcraft\Data folder. The IP in the realmlist.wtf file should be exactly the same as the IP address you entered in the realmlist table above.
- Change the first line to: set realmlist <IP address used in realmlist table>
- Example: set realmlist 127.0.0.1
(Optional) If you wish to use the WoW Launcher.exe to run your client then you must change your set patchlist to the same ip/dns name as your realmlist.

master only:

Change Config.wtf: SET portal "<IP address used in realmlist table>"
The IP in the Config.wtf file should be exactly the same as the IP address you entered in the realmlist table above. (Example: SET portal "127.0.0.1")

Note: you will need a custom client launcher (not provided) to connect to master branch server.

Supported Version

Check https://github.com/TrinityCore/TrinityCore to find the exact client version supported by master branch.

NOTE don't use localhost for address, if you need to connect to localhost use 127.0.0.1

If you still have any problem, check:

Guide

This article is part of the Installation Guide. You can read it alone or click on the previous link to easily move between the steps.