Ir al final de los metadatos
Ir al inicio de los metadatos

Estás viendo una versión antigua de esta página. Ve a la versión actual.

Comparar con el actual Ver el historial de la página

« Anterior Versión 23 Siguiente »

Guide

This article is part of the Installation Guide. You can read it alone or click on the previous link to easily move between the steps.

<<Step 4: Databases Installation

Step 6: Final Server Steps >>

Introduction

This guide is intended for advanced setups or just to provide more details in setting up your realm for local or internet use. In general the default setup explained in your particular OS specific guide should be fine for simple setups.

This guide is not meant to replace the How-to guides for your particular operating system. If you didn't read that guide go back and do that first.

Contents

Worldserver and Authserver configurations

For almost all basic setup scenarios the default localhost (127.0.0.1) IP settings should be left alone. The default bindip (0.0.0.0) should be left alone as well.

Setting the auth database realmlist for internet connections

This is where you have to use your internet IP so clients from the internet can find your server. You have to have the ports 8085 and (8086 master only) forwarded or open from your router / firewall.


Help

If you still have any problem, check:



Guide

This article is part of the Installation Guide. You can read it alone or click on the previous link to easily move between the steps.

<<Step 4: Databases Installation

Step 6: Final Server Steps >>

  • Sin etiquetas