This article is part of the Installation Guide. You can read it alone or click on the previous link to easily move between the steps. |
Before proceeding, please make sure that you have your database set up properly. |
worldserver.conf
Scroll down to the LoginDatabaseInfo, WorldDatabaseInfo, and CharacterDatabaseInfo config options and enter MySQL Server login information for the server to be able to connect to your database.
On a newly compiled config, you should have the following values:
LoginDatabaseInfo = "127.0.0.1;3306;trinity;trinity;auth" WorldDatabaseInfo = "127.0.0.1;3306;trinity;trinity;world" CharacterDatabaseInfo = "127.0.0.1;3306;trinity;trinity;characters" |
It follows this structure:
Variablename = "MySQLIP;Port;Loginname;Password;database" |
The following settings must be verified:
All other default options should be sufficient, but it is recommended that you take some time after your server is finished to read through the configs and see all the ways to customize your server.
If you choose NOT to run vmaps or mmaps, you must make the following changes:
|
If you change your mind and decide to extract and use vmaps or mmaps later, make sure to change these values back to "1" to take advantage of them. |
For most worldserver.conf setting changes, you can simply type .reload config in-game to see changes instantly without restarting the server. |
Scroll down to the LoginDatabaseInfo and enter MySQL Server login information.
LoginDatabaseInfo = "127.0.0.1;3306;trinity;trinity;auth" |
It follows this structure:
Variablename = "MySQLIP;Port;Loginname;Password;database" |
Just like the worldserver.conf, you have to enter these necessary values and customize your preferences.
You need to make sure that your authserver application directs incoming connections to your realm.
address
field according to your needs:External IP – If you want other people to connect to your server, use your external IP. Visit http://www.whatismyip.com/ to find your external IP address.
You need to make sure that your bnetserver application directs incoming connections to your realm.
address
field according to your needs:External IP – If you want other people to connect to your server, use your external IP. Visit http://www.whatismyip.com/ to find your external IP address.
The TrinityCore Team and Owners DO NOT in any case sponsor nor support illegal public servers. If you use these projects to run an illegal public server and not for testing and learning it is your own personal choice. |
After completing all the steps listed above you can now start your server.
After completing all the steps listed above you can now start your server.
Type: account create <user> <pass>
Example: account create test test
Type: account set gmlevel <user> 3 -1
Example: account set gmlevel test 3 -1
Log in with account test and password test through wow.exe.
Type: bnetaccount create <user> <pass>
Example: bnetaccount create test@test test
Type: account set gmlevel <account.username> 3 -1
Example: account set gmlevel 1#1 3 -1
Note: The username used for setting your gmlevel is not the same as the username you create with bnetaccount. You must manually find the username in auth.account.username. These are formatted as 1#1, 2#1, etc.
Log in with email test@test and password test.through Wow_Patched.exe or Wow-64_Patched.exe.
DO !NEVER! create an account directly into your database unless you are ABSOLUTELY SURE that you know what and how to do! |
The "3" is the GM account level (higher numbers = more access), and the "-1" is the realm ID that stands for "all realms".
Open the world database in your database management tool and find the command table. This table shows a full list of GM commands, their descriptions, and the security (GM level) needed to use them. You will not find a more accurate list of current GM commands anywhere else (assuming you keep your database up-to-date). The security level for a given command identifies that THAT GM level can use the command, along with all GM levels above it. For example, if a command has a security of 2, all accounts with a GM level of 2, 3, and 4 will be able to use it. More detailed information can be found at GM Commands Page. |
"Unable to open wmo_list.txt! Nothing extracted."
you need to run Mapextractor.exe before the makevmaps_simple.bat.
This article is part of the Installation Guide. You can read it alone or click on the previous link to easily move between the steps. |