This article is part of the Installation Guide. You can read it alone or click on the previous link to easily move between the steps. |
When this is complete you will receive the following message which can be safely ignored.
Processing Map 724 [################################################################] Extracting GameObject models...Extracting World\Wmo\Band\Final_Stage.wmo No such file. Couldn't open RootWmo!!! Done! Extract V4.00 2012_02. Work complete. No errors. |
worldserver.conf / authserver.conf (bnetserver.conf for 6.x/master) (you must remove .dist from worldserver.conf.dist / authserver.conf.dist / bnetserver.conf.dist files to obtain them)
Scroll down to the LoginDatabaseInfo, WorldDatabaseInfo, and CharacterDatabaseInfo config options and enter MySQL Server login information for the server to be able to connect to your database.
On a newly compiled config, you should have the following values:
LoginDatabaseInfo = "127.0.0.1;3306;trinity;trinity;auth" worldserver.conf / authserver.conf (bnetserver.conf for 6.x/master) WorldDatabaseInfo = "127.0.0.1;3306;trinity;trinity;world" worldserver.conf CharacterDatabaseInfo = "127.0.0.1;3306;trinity;trinity;characters" worldserver.conf |
It follows this structure:
Variablename = "MySQLIP;Port;Loginname;Password;database" |
The following settings must be verified:
All other default options should be sufficient, but it is recommended that you take some time after your server is finished to read through the configs and see all the ways to customize your server.
If you choose NOT to run vmaps or mmaps, you must make the following changes:
|
If you change your mind and decide to extract and use vmaps or mmaps later, make sure to change these values back to "1" to take advantage of them. |
For most worldserver.conf setting changes, you can simply type .reload config in-game to see changes instantly without restarting the server. |
Realmlist Table
You need to make sure that your authserver / bnetserver (6.x) application directs incoming connections to your realm.
address
field according to your needs:External IP – If you want other people to connect to your server, use your external IP. Visit http://www.whatismyip.com/ to find your external IP address.
The TrinityCore Team and Owners DO NOT in any case sponsor nor support illegal public servers. If you use these projects to run an illegal public server and not for testing and learning it is your own personal choice. |
This article is part of the Installation Guide. You can read it alone or click on the previous link to easily move between the steps. |