Ir al final de los metadatos
Ir al inicio de los metadatos

Estás viendo una versión antigua de esta página. Ve a la versión actual.

Comparar con el actual Ver el historial de la página

« Anterior Versión 12 Siguiente »

Guide

This article is part of the Installation Guide. You can read it alone or click on the previous link to easily move between the steps.

<<Step 4: Server Setup

 

Introduction

This guide is intended for advanced setups or just to provide more details in setting up your realm for local or internet use. In general the default setup explained in your particular OS specific guide should be fine for simple setups.

This guide is not meant to replace the How-to guides for your particular operating system. If you didn't read that guide go back and do that first.

Contents

Client setup

Client setup is pretty simple. Edit Data\enUS\Realmlist.wtf (branch 3.3.5) or WTF\Config.wtf (branch 6.x)
Data\enUS\Realmlist.wtf (3.3.5):
set realmlist 127.0.0.1
set patchlist 127.0.0.1
set portal 127.0.0.1

 

WTF\Config.wtf (6.x):
set portal 127.0.0.1


Make sure the IP or hostname directs the client to the server by IP or hostname
(which will usually be the same as your realmlist database entry).


6.x branch: drop Wow.exe over connection_patcher to create Wow_patched.exe .

Worldserver and Authserver configurations

For almost all basic setup scenarios the default localhost (127.0.0.1) IP settings should be left alone. The default bindip (0.0.0.0) should be left alone as well.

Setting the auth database realmlist for internet connections

This is where you have to use your internet IP so clients from the internet can find your server. You have to have the ports 8085 and (8086 6.x only) forwarded or open from your router / firewall.


Help

If you still have any problem, check:

 

Guide

This article is part of the Installation Guide. You can read it alone or click on the previous link to easily move between the steps.

<<Step 4: Server Setup

 

  • Sin etiquetas